Beginning of this page
Jump to main content

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.


Worldwide > Japan日本語


µPD720102 ECOUSB™ Series Product Overview



µPD720102

The µPD720102 host controller is the optimal solution for adding a USB interface to your devices. The controller offers hardware-based speed enhancement while maintaining compatibility with existing software drivers. The controller is also power-efficient, with or without a USB device attached. With a 1.5 V regulator for the core logic, USB terminating resistors, and other resistors provided on-chip, µPD720102 uses less external components, thereby contributing to the development of environment-friendly devices.




Specifications

  • Compliant with the USB 2.0 specification (Max. transfer rate: 480 Mbps)
    • USB-IF Certified (Test ID = 80000014)
  • 3 downstream USB ports
  • Compliant with EHCI Rev 1.0
  • Compliant with OHCI Rev 1.0a
  • Compliant with PCI specification Rev 2.2
  • 3.3V PCI Interface
  • Compliant with PCI Power Management specification Rev 1.1
  • Supports PCI Mobile Design Guide Rev 1.1
  • 30 MHz crystal oscillator interface, supports 48 MHz clock input
  • Control pin for accelerating data transfer under high-Speed mode
  • Low power consumption
  • 3.3 V single power supply (1.5 V internal operating voltage from on-chip regulator)
  • On-chip resistors for reduced board cost
  • Compact package
    • 120-pin Plastic TQFP (Fine Pitch) (14 x 14 mm)
    • 121-pin Plastic FBGA (8 x 8 mm)
  • Driver support under various OS


Internal Block Diagram

Internal Block Diagram


Application

  • PC/server motherboards
  • PCI Add-in Card,PC Card
  • Digital TV, HDD Recorder, STB
  • Printer, Multi-function Printer
  • Wireless Router, NAS (Network Attached Storage), Printer Sever


Order Information

Order Name Package
µPD720102GC-YEB-A 120-pin Plastic TQFP (Fine Pitch) (14 x 14 mm) Lead(Pb)-Free
µPD720102F1-CA7-A 121-pin Plastic FBGA (8 x 8 mm) Lead(Pb)-Free



Evaluation Board for Reference Design

A reference design evaluation board with µPD720102. Can be installed on a PC with a PCI slot to be used as a USB 2.0 host interface. (Driver software required separately)


Image Order Name Information
ET-D720102-0003 ET-D720102-0003 RoHS compliant.
Available in limited quantity. Contact an NEC Electronics distributor for purchase.
ET-D720102-0002 ET-D720102-0002 Discontinued
(No longer available for purchase)



Inquiry Concerning USB




End of this page.
Top of this page