| 3.3.3 Resealing
a complete dry pack (2/2 Page) |
|
Observe the following
points when resealing a dry pack with tape.
1. An opened dry pack can only be resealed once, within the time limit, and following the method shown
in Figure 3-22 on the previous page.
2. The time limit for resealing is 168 hours.
3. The resealing time limit does not include the time limit that applies after the dry pack is opened.
For the time limit that applies after the dry pack is opened, refer to the soldering conditions of the
relevant product.
The following explains an example of calculation for storage time |
.
| Example) If the products are specified
to be used within 72 hours after the dry pack has been opened, the valid storage period of these products
is as follows: |
|
Figure 3-23 Example
of Calculation for storage time
|
| In this case, the valid period after
the dry pack has been opened once is X + Z = 72 hours, and the storage time if the dry pack is closed
again with an adhesive tape Y is 168 hours. Therefore, the total storage time is 240 hours. |
|
