Product Specification of the µPD720200 USB 3.0 Host Controller

- Based upon Universal Serial Bus 3.0 Specification Revision 1.0, which is released by USB Implementers Forum, Inc

- Based upon Intel's eXtensible Host Controller Interface (xHCI) Specification Revision 0.95

- Based upon PCI Express® Base Specification 2.0, which is, released PCI SIG

- Supports the following speed data rate as follows;
     Low-speed (1.5 Mbps) / Full-speed (12 Mbps) /
     High-speed (480 Mbps) / Super-speed (5 Gbps)

- Supports all USB compliant data transfer type as follows;
     Control / Bulk / Interrupt / Isochronous transfer

- Supports 2 USB downstream ports for all speeds

- Supports USB legacy function

- Supports PCI Express® related expansion card specification
     ExpressCard® Standard Release1.0
     PCI Express® Card Electromechanical Specification Revision 2.0
     PCI Bus Power Management Interface Specification Revision 1.2

- Operational registers are direct-mapped to PCI memory space

- Requires External Serial Peripheral Interface (SPI) type FLASH PROM

- System clock: 24 MHz crystal or 48 MHz external clock

- 3.3 V and 1.05 V power supply

- PACKAGE : 176-pin plastic FBGA (10 x 10 mm, 0.65 mm ball pitch)