Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.
µPD168101
Stepping Motor Driver
Monolithic Quad H Bridge Driver Circuit
Overview
The µPD168101 is monolithic quad H-bridge driver LSI which uses power MOSFETs in the output stages. By using the MOS process, this driver IC has substantially improved the voltage loss of the output stage and power consumption as compared with conventional driver circuits using bipolar transistors.
By eliminating the charge pump circuit, the current during power-OFF is drastically decreased.
In addition, a low-voltage malfunction prevention circuit is also provided that prevents the IC from malfunctioning when the supply voltage drops.
As the package, a 24-pin plastic TSSOP is adopted to enable the creation of compact, slim application sets.
This driver IC can drive two stepping motor at the same time, and is ideal for driving stepping motors in the lens of a camera. It is the best for lens drive drivers, such as a digital camera and a video camera. Moreover, since the input of two terminals is respectively owned to H bridge 1 circuit, a maximum of four loads, such as DC motor, can be driven simultaneously.
Features
- Four H bridge circuits employing power MOSFETs
- Low current consumption by eliminating charge pump
VM pin current when power-OFF: 10 µA MAX.
VDD pin current: 10 µA MAX. - Input logic frequency: 100 kHz
- 3-V power supply
Minimum operating supply voltage: 2.5 V
- Low voltage malfunction prevention circuit
- 24-pin plastic TSSOP (5.72 mm (225))
Ordering Information
|
Document
Block Diagram
