|
|
PG-FP5
|
PG-FP4
|
|
External dimensions
|
147x95x30 mm (including projections)
|
200x115x46 mm (including projections)
|
|
Weight
|
About 230 g
|
About 420 g
|
|
Target device
|
Microcontrollers incorporating
single-/two-power-supply flash memory
(two-power versions are for sales promoted products)
|
Microcontrollers incorporating
single-/two-power-supply flash memory
|
|
Host I/F
|
USB2.0(USB1.1), serial interface
|
USB1.1, serial interface, parallel interface
|
|
External control I/F
|
Available
|
Not available
|
|
Terminal control
|
Available
|
Not available
|
|
Self-testing function
|
Available
|
Not available
|
|
Target I/F
|
CSI (5 MHz max.), CSI-H/S (5 MHz max.),
UART, IIC, PORT
|
CSI (2.5 MHz max.), CSI-H/S (2.5 MHz max.),
UART, IIC, PORT
|
|
VDD from programmer
|
1.5 to 6 V (rated max. current: 200 mA) (switched internally)
|
2.1 to 6 V (rated max. current: 200 mA) (switched internally)
|
|
CLK from programmer
|
Possible (selectable from 1 to 20 MHz)
|
Possible (selectable from 1 to 20 MHz)
|
|
ROM code
|
Up to 16 MB
(when area divided by 8 or 4)
|
Up to 2 MB (when area divided by 2)
|
Device-specific
information
|
PG-FP5 parameter file (*.pr5)
Multiple files can be loaded (up to 8)
|
PG-FP4 parameter file (*.prm)
Only one file can be loaded
|
|
Security settings
|
Can be set using Security command
|
Can be set using Security command
|
Programmer
standalone writing
|
NEXT, ENTER, CANCEL buttons used
START button is used for programming
|
NEXT, ENTER, CANCEL buttons used
|
|
Target cable
|
16-pin cable
|
10-pin, 16-pin cable
|
|
Power supply
|
Dedicated AC adapter (15V, 1A)
|
Dedicated AC adapter (15V, 1A)
|
|
Programming GUI
|
Programming GUI for PG-FP5
|
Programming GUI for PG-FP4
|
