What is the conversion socket EV-9200G-80's weight and size?
A1
The actually measured values are as follows.
Weight: 80g
Dimensions: 132 x 95 x 27 (mm)
These measured values are not overly strict measurements.
Please use them for reference purposes only.
part -0002
Projections of EV-9200G-80 conversion socket
Q1
There are two projections on the socket,
but since I do not want to make new holes in the PCB,
can I cut off these projections?
A1
These projections are for positioning on the PCB.
If you remove these projections,
be very careful about correct positioning and position fixing,
because of the risk of slippage during soldering
and also the risk of short circuits between neighboring pins.
part -0003
Can reflow soldering be used for the EV-9200G-80 ?
Q1
Can reflow soldering be used for board mounting of the EV-9200GC-80 conversion socket?
A1
The EV-9200GC-80 does not support reflow soldering.(Reflow soldering is not possible.)
Therefore solder this part by hand.
SITE MAP
