[AZ850] Trace data

Time displayed in AnalyzeWindow of AZ850 is not synchronized with the actual time.

[Soft trace]

• Time information necessary as AZ trace data is acquired from the timer/counter on the user target. Check if the time set to the timer/counter is correct.

[Hard trace]

• The actual frequency may differ from the frequency set to ID850.
  Select [Configuration] from the [Option] menu of the ID850, and then check that the value set in "Clock" on the displayed dialog box is the same as the actual frequency.
  
• Select [Extended option] from the [Option] menu of the ID850, and check that "Add Up Timetag" is not selected.
  If "Add Up Timetag" is selected, traces of AZ850 are not correctly displayed.