78K0Stools : [RA78K0S] Link and Memory Mapping

• If a variable is located in the external memory space, an error occurs during linking.


• Can it be checked to where the stack is assigned?


• When the vacant area of ROM is filled with NOP instructions and then execution jumps to initial settings by using the jump instruction as a countermeasure against a microcontroller hang-up, is there any way other than using manual input?

78K0Stools : [RA78K0S] Converter

• The object converter outputs error F201.

78K0Stools : [PM+] General

• What device is supported by PM+ and what types of packages are available?

78K0Stools : [PM+] Others

• Can the address of a variable be checked?

78K0Stools : [CC78K0S] General

• Do I have to consider the 2-byte alignment when describing programs in C?


• What should be done to place a variable with default value for only reference in ROM?


• What should be done to learn the address of a global variable described in C?


• Building with PM+ fails if #pragma section command is executed.


• There are startup routines “Normal”, “For boot area”, and “For flash area”.  Which should be used?


• Can a bit field of 32 bits be created?

78K0Stools : [CC78K0S] Startup Module

• The startup routine is modified but “_@STBEG” symbols result in an undefined symbol error during linking.


• How should an option byte be set?

78K0Stools : [CC78K0S] Link and Memory Mapping

• If a variable is located in the external memory space, an error occurs during linking.


• Can it be checked to where the stack is assigned?

78K0Stools : [IECUBE] Others

• When using the IECUBE, what is the difference between the USB 1.1 and USB 2.0 connections?

78K0Stools : [SP78K0S] General

• What is the configuration of SP (software package)?

78K0Stools : [Applilet] General

• What is the recommended operating environment for Applilet?


• What types of devices are supported?


• How should Applilet be set up?

78K0Stools : [Applilet] How to Use Applilet

• How should Applilet be used?


• Can set contents be saved?

78K0Stools : [Applilet] Applilet Code Generation

• How is the generated file configured?


• What happens to the existing file if settings are changed to re-generate the code using Applilet?

78K0Stools : [Applilet] Applilet Troubleshooting

• Error message “Path or file cannot be found.” is displayed.


• Error message “A006 File not found ‘Files\Applilet\sample\sample.lmf’ Program Aborted.” is displayed during building.