2008/01
78K0Stools : [SP78K0S] General
   What is the configuration of SP (software package)?
78K0Stools : [RA78K0S] Link and Memory Mapping
   When the vacant area of ROM is filled with NOP instructions and then execution jumps to initial settings by using the jump instruction as a countermeasure against a microcontroller hang-up, is there any way other than using manual input?
78K0Stools : [IECUBE] Others
   When using the IECUBE, what is the difference between the USB 1.1 and USB 2.0 connections?

2006/07
78K0Stools : [RA78K0S] Link and Memory Mapping
   Can it be checked to where the stack is assigned?
   If a variable is located in the external memory space, an error occurs during linking.
78K0Stools : [RA78K0S] Converter
   The object converter outputs error F201.
78K0Stools : [PM+] Others
   Can the address of a variable be checked?
78K0Stools : [PM+] General
   What device is supported by PM+ and what types of packages are available?
78K0Stools : [CC78K0S] Startup Module
   How should an option byte be set?
   The startup routine is modified but “_@STBEG” symbols result in an undefined symbol error during linking.
78K0Stools : [CC78K0S] Link and Memory Mapping
   Can it be checked to where the stack is assigned?
   If a variable is located in the external memory space, an error occurs during linking.
78K0Stools : [CC78K0S] General
   Can a bit field of 32 bits be created?
   There are startup routines “Normal”, “For boot area”, and “For flash area”.  Which should be used?
   Building with PM+ fails if #pragma section command is executed.
   What should be done to learn the address of a global variable described in C?
   What should be done to place a variable with default value for only reference in ROM?
   Do I have to consider the 2-byte alignment when describing programs in C?
78K0Stools : [Applilet] How to Use Applilet
   Can set contents be saved?
   How should Applilet be used?
78K0Stools : [Applilet] General
   How should Applilet be set up?
   What types of devices are supported?
   What is the recommended operating environment for Applilet?
78K0Stools : [Applilet] Applilet Troubleshooting
   Error message “A006 File not found ‘Files\Applilet\sample\sample.lmf’ Program Aborted.” is displayed during building.
   Error message “Path or file cannot be found.” is displayed.
78K0Stools : [Applilet] Applilet Code Generation
   What happens to the existing file if settings are changed to re-generate the code using Applilet?
   How is the generated file configured?