This is because there is an address that cannot be expressed in the specified HEX format.
Check if the specified addresses are within the range that can be expressed
by the specified option, by referring to the link map information displayed during linking.
The -KIE option is specified by default.
| -KI | Intel standard HEX format
0H-0FFFFH(up to 64 KB) |
| -KIE | Intel expanded HEX format
0H-0FFFFFH(up to 1 MB) |
| -KM | Motorola S type format (standard address)
0H-0FFFFFFH(up to 16 MB) |
| -KME | Motorola S type format (32-bit address)
0H-0FFFFFFFFH(up to 4 GB) |
-78K0-
-78K0S-
-78K4-
SITE MAP
